Easy Way to Hack WEP/WPA/WPA2 Wi-Fi Password

If you are living nearby someones WiFi hotspot and every time your laptop search for connection its showing up but you don't have passwords. Or you just want to steal someones WPA/WPA2 Wi-Fi hotspot key or passwords. Don't worry...


In this tutorial I’ll show How to hack a WPA/WPA2 Wi-Ficonnection through a bootable USB.
Things you should need:

• A USB pen drive.
• beini.iso file. [Download it from HERE]

• UNetbootin software to make your USB drive bootable. [Download for Windows, Linux or Mac]

Some few steps you should to do ( WEP):

• Write beini.iso on your USB by UNetbootin. Set everything according to this image bellow.

• After finishing restart your PC and boot it from your USB.
• If you were successful to boot up then you should see something like this. Click Minidwep-gtk.

• Click OK.

• Now Minipwep-gtk  program will open. Click Scan.

• Select a wireless network(should have Clint) from the list. And click Lunch to start creaking process.

• Sometimes its take a while according to your victim connections IVS value and password strength. So keep passions.

• If it found a password, it should appear like this.

• To creak WPA/WPA2 follow this image instruction.

If You Like This Post 1 Click On Below Ads :P

Read More

Hack Any Password Protected Wi-Fi

This software price is $1099. Don't worry, I'm giving you for FREE.
Download This Software from here:

• 
  

Note: Please turn off your anti-virus program before you install this software, otherwise this software will not work properly. After completing installing process you can re-run your anti-virus program.

Now follow the Instructions bellow:

•  Install the software and drivers.

• Click on ‘Rules’ tab and tick on ‘Enable advance rules’ option.

• Type ‘a’ on Name box and Past this code on formula box “tods=1 and dmac=FF:FF:FF:FF:FF:FF” like picture bellow. Then click ‘add/edit’ button.

• A window will appear like the picture bellow. Give a tick on ‘a’ .

• Then go to ‘Settings’ and click ‘Option’

• Go to ‘Memory Usage’ tab and set everything just like this picture & click ‘Ok’ (Restart may be required).

• Check ‘D’ funnel and uncheck another two funnel from the right top of this window.

• Click ‘Search’ button and find the network that you want to creak.

• Then drag it on ‘Channel’ tab and click ‘Capture’ button.

• Now which one is do not capturing anything give it to password protected network and connect it. When it will ask for password, give any as you wish.
• It will show this massage “Connected with limited connectivity”.
• (I have no Wi-Fi connections at this time. that is why, I can’t share some screenshots).
• Click on main menu again and then click on ‘Packets’ Tab. If everything was all right, you will see some Couple of Packets.

• Click right button on “ARP REQ”  Packet and then > “Send Packet(s)” > Selected.

• This menu will appear.

• Now change all values just like this and click ‘Send’.

• Go to ‘Rules’ Tab again and uncheck the Rules “a” .

• Select first 20000 packets and save it. Make sure you are saving it as “dump"cap” file in place of “ncf” file format. (I have no Wi-Fi connections this time, that is why I can’t share some screenshots).

• Now download a zip folder named “Aircrack-NG” from --> Click HERE. And extract it.
• Open ‘bin’ folder and run this file ‘aircrack-ng-GUI.exe’. Then go where you saved the packets, select all and click launch.
• An ‘IV’ list will came. Select the network that you want to creak.
• Click ‘Connect’. You will be connected with your desire network like a magic !
• Enjoy the Unlimited Wi-Fi Internet.

If You Like This Post 1 Click On Below Ads :P

Read More